Lasersko vezenje i graviranje džinsa

* Laser type: Hermetic and detached CO2 laser tube
* Laser power: 100W
* Cutting area: 1800mmx1800mm Zinc ferro alloy working table
* Cutting speed: 0-18000mm/min
* Moving system: step system, offline control
* Power supply: AC220V±5% / 50HZ
* Format support: AI, BMP, PLT, DXF, DST
* Standard collocation: Top exhaust filtration system, assist mini air compressor, laser chiller
* Select collocation: Exterior exhaust system, assist cutting head, CCD camera orientation

MBL JG-180180

 

* Laser type: Hermetic and detached CO2 laser tube
* Laser power: 100W or 150W
* Cutting area: 2500mmx1000mm pedrail working table
* Cutting speed: 0-36000mm/min
* Moving system: Imported Japan servo system, offline control
* Power supply: AC220V±5% / 50HZ
* Format support: AI, BMP, PLT, DXF, DST
* Standard collocation: Top exhaust filtration system, assist mini air compressor, laser chiller
* Select collocation: Exhaust, assistant laser cutting head, auto feeding equipment and rewinder part

MBL JG-250100

 

Close type large area laser cutting machine, design according to European standard, suits for all kind of home textile material, safe cutting process without pollution. Feeding and rolling system is optional, realize auto feeding and continuous cutting.

 

* Laser type: Hermetic and detached CO2 laser tube
* Laser power: 120Wor150W
* Cutting area: 2500mmx3000mm pedrail working table
* Cutting speed: 0-30000mm/min
* Moving system: Imported Japan servo system, offline control
* Power supply: AC220V±5% / 50HZ
* Format support: AI, BMP, PLT, DXF, DST
* Standard collocation: Top filtration exhaust, assist mini air compressor
Select collocation: Exterior exhaust system, auto feeding equipment, multi-head cutting equipment, Assistant laser cutting head, feeding and rolling equipment

MBL CJG-250300

 

This model combines high speed galvanometer engraving, punching and X-Y large area cutting combines well together. Mutually do continuous work in phase. And it can be equipped with auto feeding and rolling system, get engraving, punching, and cutting technics done in one machine without any letup. Not only save transform time during different procedure, but also avoid the procedure to repeating match the position of cutting and engraving.

 

* Laser type: CO2 RF metal laser tube
* Laser power: 70W
* Cutting area: 2500mmx4000mm pedrail working table
* Cutting speed: 0-30000mm/min
* Engrave speed: 0-300000mm/min
* One time galvanometer engrave area: 210mmx210mm
* Moving system: Imported japan servo system, 5 inch lcd screen online control
* Power supply: AC220V±5% / 50HZ
* Format support:  AI, BMP, PLT, DXF, DST
* Standard collocation: Top filtration exhaust, assist mini air compressor
* Select collocation: Exterior exhaust system, auto feeding equipment, multi-head cutting equipment, Assistant laser cutting head, feeding and rolling equipment

MBL ZJJG-250400

 

With the vigorous development of the automobile manufacturing industry, the demand of personalized automobile interior decoration market becomes stronger, homogenization production was out of time. Just under this background, ZJJG(3D)-18080 comes into market. It can not only engrave and punch on all kind of fabric, leather, synthetic material, automobile seating and pillowcases, but also it can cut according to different type and size of automobiles. Realize cutting and engraving in one machine, gemination increase the produce efficiency.

 

* Laser type: CO2 RF Metal laser tube
* Laser power: 70W, 100W, 150W Optional
* Cutting area: 1800mmx800mm
* Cutting speed: 250mmx250mm - 800mmx800mm
* Engrave speed: 0-300000mm/min
* Cutting speed: 0-30000mm/min
* Moving system: Offline or online control, 5 inch lcd screen display
* Power supply: AC 220V±5% / 50HZ
* Format support: AI, BMP, PLT, DXF, DST
* Standard collocation: 500W exhaust

MBL ZJJG(3D)18080

 

Adopt international advanced zinc and iron honeycomb net, convey working table and high power laser generator, which is suitable for multi-layer and thick layer material’s cutting. High cutting speed and precision, excellent exhausting effect, completely conquer the limitation of minimum corner  in traditional knife cutting process, which can cut curve precisely and freely. International advanced hermetic environmental design, according with Europe CE standard.

 

* Laser type: CO2 axis fast laser generator
* Laser power: 1200W or 200W 300W 400W
* Working area: 1800mmx2000mm  
* Cutting speed: 0-60000mm/min
* Repeating location: <0.1mm
* Moving system: Embed offline controlling system with safety alarm system
* Cooling system: Professional laser water chiller
* Laser power adjustment: Following laser power adjustment
* Power supply: AC 380V ± 5% / 50HZ
* Format support: AI, BMP, PLT, DXF, DST
* Standard collocation: Water-chiller group, air - compressor group, filter group
* Select collocation: Outside exhaust fans, continuous auto- feeder, LCD computer, multi layer assisted equipment

MBL CJG-180200

 

The computerized embroidery, high speed galvanometer engraving and laser engraving combined perfectly, precise cutting result, it innovated the leading precedent for engraving on embroidery product, enrich the embroidery art, increase the product level and added value, make the embroidery product with outstanding individuality, high quality and aesthetics. It is very suitable for embroidery, edge cutting, hollowing, appliqué cutting, engraving and kiss-cut in various fabric materials, inject the new energy for technology innovation in embroidery industry.

This model is unlimited for the number of embroidery heads, sharing one set laser system. The slim beam spot of laser (reach 0.1mm) and motor without brush, ensure the laser moving along with the bridge with high speed, high acceleration, accurate position and working efficiency. Advanced lens and electromagnetic motor ensure the laser beam high speed and precise cutting, compared with traditional belt guide and laser heads drived with X, Y axis motor, this laser cutting quality is better.

It adopts Goldenlaser control software, strong pertinence, convenient operation, high safety. Also optional equipped laser cutting table and rolls-to-rolls feeding device, these all advanced collocation, not only provide new solutions for clients, but also initiate epoch in embroidery and laser industry.

 

* Laser type: CO2 RF metal laser tube
* Laser power: 70W  100W  150W for choice
* Precision of power control: 0.1W
* Cutting speed: 0-300000mm/min
* Max moving speed: 1600mm/s
* Power supply: AC220V±5%/50HZ
* Support format: AI, BMP, PLT, DXF, DST etc.
* Adjust of laser energy: 0-100% following control of laser energy
* Movement control: Offline EMS memory continuous movement, 3-axis dynamic engraving system
* Cooling mode: air cooling
* Control mode: Separate computer embroidery and laser cutting system,  freely switch
* Bridge length: 2m-15m for choice
* Auxiliary system: Exhaust system, selective cutting worktable
* Transfer mode of files: CPI communication

MBL LBS

 

* Laser type: Hermetic and detached CO2 laser tube/Hermaetic and detached CO2 laser tube
* Laser power: 40W, 70W, 100W, 150WOptional/100W
* Cutting area: 1000mmx250mm
* Galvo engrave area: 175mmx175mm (standard) 100mmx100mm、200 mm×200mm(Option)
* Engraving and cutting speed: 0-300000mm/min
* Moving system: Offline Galvanometer moving control system, 5" LCD display
* Power supply: AC220V±5% / 50HZ
* Format support: AI, BMP, PLT, DXF, DST etc.
* Standard collocation: Laser chiller (not available if air cooling), 500W exhaust
* Select collocation: CCD camera vision for auto orientation of engraving and cutting system

MBL ZJ-2092

1. Omogućava trenutno generisanje uzorka (u CAD programu), čime se ubrzava brzina projektovanja,
2. Primenljiv za specijalne materijale: postave, skijaška odela, zaštitne materijale,... Odlikuje ga velika preciznost, kvalitet, brzina,...
3. Omogućava ubacivanje više slojeva tkanine i sečenje više slojeva,
4. Omogućava on-line zamenu uzorka (ako ste radili sa jednim uzorkom, kreirali novi - ne treba da zaustavljate mašinu, ona sama nastavlja sa radom sa novim uzorkom)
5. Putanja laserskih zraka garantuje da će mašina uvek raditi precizno
6. U slučaju velikih i abnormalnih materijala, možete upotrebiti njihovo privremeno skladi{tenje - zatim definišite kako želite da isečete materijal i isecite ga - slično i sa kožom

 

* Laser-type: American CO2, RF laser tube / Hermetic and detached CO2, laser tube
* Laser-power: (Standard collocation) 40W  (Special collocation) 55W  70W  100W
* Cutting area: 1550 x 3000 mm
* Cutting speed: 0-1500 mm/s
* Repeating location: ±0.03 mm
* Moving system: The servo system from Japan
* Cooling mode: Air cooling / Water cooling
* Working voltage: 220 V   ±10%   50Hz
* Whole power: 1500W
* Cutting platform: Professional auto-feeding material pedrail working table
* Power controlling mode: Laser power and moving system cooperate

MBL JG-160300

 

Ivica sečenja kod ovih mašina se određuje, automatski, ili putem detektovanja različite boje ivice (obruba) ili pozicioniranjem na karakteristične tačke zaštitnog znaka, čime se postiže isecanje zaštitnog znaka u punoj veličini. Odgovarajući softver nudi mogućnost zadavanja isecanja, pamćenja u memoriji, brisanja. Na ovaj način se može postići isto isecanje zaštitnog znaka, ali na različitim pozicijama. Stoga se posti`e visoka produktivnost i povećanje efikasnosti rada. Ova mašina je uzrokovala pravu revoluciju u industriji rada sa zaštitnim žigovima. Podesna i za uobičajeno sečenje i graviranje na svim nemetalnim materijalima.

 

* Laser-type: Hermetic and detached CO2, laser tube
* Laser-power: 65W
* Cutting area: 850x500 mm (length x width)
* Cutting speed: 0-800 mm/s
* Repeating location: ±0.05 mm
* Moving system: CNC controlling units
* Cooling mode: Water-cooling and protection system
* Shooting mode: CCD camera
* Screen area at one-time: 2 - 120 mm2
* Working voltage: 220 V   ±10%   50Hz
* Whole power: 1000W
* Auxiliary equipments: Exhaust-fans, air-exhaust pipe
* Cutting platform: Professional honeycomb cutting working table

MBL ZDJG-10050

 

1. Napravljena od čelika, pouzdana, stabilna, visoke preciznosti
2. Dizajn putovanje laserskog zraka je prost, pa se ne zahteva često podešavanje i održavanje
3. Jedinstven softver za kontrolu pomeranja, omogućava brzo pomeranje laserske glave, bez izobličenja i uz očuvanu tačnost
4. CAD integracija i omogućavanje trenutnog projektovanja i izmene svih parametara, u bilo kom trenutku ili fazi obrade, bez zaustavljanja mašine
5. Opcija: upravljanje ubacivanjem materijala, čime se postiže neprekidan rad, kao i sečenje višeslojnih materijala

 

* Laser-type: American CO2, RF laser tube / Hermetic and detached CO2, laser tube
* Laser-power: (Standard collocation) 40W  (Special collocation) 55W  70W  100W
* Cutting area: 1550x2200 mm
* Cutting speed: 0-1500 mm/s (servo)  0-80 mm/s (stepping)
* Repeating location:  ±0.03 mm
* Moving system: Japan imported servo system or stepping control system
* Cooling mode: Air-cooling / Water-cooling
* Working voltage: 220 V   ±10%   50Hz
* Whole power: 1500W
* Auxiliary equipments: Exhaust-fans, air-exhaust pipe
* Cutting platform: Professional auto-feeding material pedrail or the honeycomb working table
* Power controling mode: Laser power and moving system cooperate
* Controlling software: Original laser software

MBL JG-160220